The C4 vertical panel saw is a useful addition
to any small or medium workshop where sheet material
is regularly processed. Vertical operation makes handling
of the sheets much easier as well as saving valuable
floor space. The saw can be secured permanently to a
wall or moved around with the aid of the optional wheels
and either the fixed or the folding stand. It can also
be transported in the back of a van for site use.
The
saw unit with its 44.5mm depth of cut and 2.4kW motor
is fixed to a mounting plate which slides up and down
the two guide bars, supported by a spring recoil device.
Vertical cuts are made by positioning the sheet in the
correct position on the frame and moving the saw blade
down through the sheet; horizontal cuts are made by rotating
the saw unit through 90°, locking it in the correct vertical
position and moving the sheet through the blade. Rollers
on the lower rail ease the passage of the sheet through
the saw and there are wheeled extensions available for
the bottom rail to allow 2440 x 1220mm(8' x 4') sheets
to be safely processed.
The saw comes fitted with a mid-way
fence which makes the handling of narrower width boards
much more convenient. The two horizontal timber supports
on the mid-way fence are secured in place with quick release
cam clamps which allow the supports to be removed in a
few seconds when full depth sheets are to be cut. The mid-way
fence is fitted with a precision stop for accurate repeat
length cutting.
Other accessories available are: (a) a sliding
dust extraction kit with a 6.5metre hose which slides over
the rollers at the top of the machine as the saw moves
up and down, (b) a multiposition length stop which allows
for up to eight pre-set lengths to be set and (c) a hold
down bar with support fingers and non marring rollers for
use when cutting thin materials such as Perspex. Click
here for full accessory details.
A package
consisting of the basic saw with the mid-way fence together
with the fixed stand, wheel set and sliding dust kit is
available at a small cost saving over the individual items.
Please note that a blade is not supplied as standard with
the saw. The 64T blade shown below is suitable for general
sheet material cutting, other blades are available on request.
To view or order, please contact us or find
your nearest dealer.
|
